Woodworking Plans

🔥+ Woodworking Plans 28 May 2020 So, never use a cyclone without a good (80% or better for 1 micron or smaller particles) filter on your vacuum or dust collector downstream.

Woodworking Plans This plan is a 26-page PDF file that explains building a go-cart with 2 seats. It starts off by listing all the parts, tools, and materials you'll need to ...

Most Popular Small Ranch House Plans

Simple garden arbor design. This arbor is built using 2×4 and 1×2 lumber. See the arbor plans below for assembly.

for 1 last update 2020/05/28


Sponsored


Arbor Plans Material List

Disc. Qty. Size
2×4 Top 2 7′
2×4 Sides 4 6′ 9″
1×2 Top 7 1′ 3″
1×2 Sides 12 1′
Hardware
3 1/2″ carriage bolts -nuts-washers 8
 1 1/2″ finishing nails
 2 1/2″ finishing nails



Cut the 7′ 2×4 as shown above, this will be the top of the arbor. The 4′ x 2″ piece that is cut out will be used on top, see details below.


Nail the 4′ x 2″ piece that was cut out to the top using 2 1/2″ finishing nails. See details above.


Cut the 1×2 to 1′ 3″. Nail 1 1/2″ finishing nails the 1 last update 2020/05/28 into the 1×2 and into the 2×4. See details above.
Cut the 1×2 to 1′ 3″. Nail 1 1/2″ finishing nails into the 1×2 and into the 2×4. See details above.


Cut 4 2 x 4’s to 6′ 9″. Cut 12 1 x 2’s to  1′. Assemble as shown above using 2 1/2″  finishing nails.

Woodworking Planshow to Woodworking Plans for
Drill holes and install the 3 1/2″ carriage bolts. See details above.

Resources:

Trellises & Arbors: Over 35 Step-by-step for 1 last update 2020/05/28 Projects You Can BuildTrellises & Arbors: Over 35 Step-by-step Projects You Can Build

Woodworking Planshow to Woodworking Plans for Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Popular DIY Projects

Archives

Woodworking Planshow to Woodworking Plans for Find It Here

DIYGardenPlans © 2018